Order desk: 1-954-867-9003
8167 Lost Creek Lane
Delray Beach, FL 33446

Download Catalog (PDF) Blog Newsletter Twitter Facebook YouTube Channel
6:1 Heavy Wall Heat Shrinkable Tubing
Part Number: HS6-ED

Although very flexible in its nominal state, the 6 to 1 Heat Shrink Tubing after full recovery, is stiff and tough like a rock.




6:1 Heavy Wall Heat Shrinkable Tubing
Variations
Part Number Pre-Shrink ID Recovered ID Quantity
HS6-ED-075-4 0.75" 0.125" 1
HS6-ED-075-4-5 0.75" 0.125" 5
HS6-ED-075-4-10 0.75" 0.125" 10
HS6-ED-075-1 0.75" 0.125" 1 Foot
HS6-ED-130-4 1.3" 0.220" 1
HS6-ED-130-4-5 1.3" 0.220" 5
HS6-ED-130-4-10 1.3" 0.220" 10
HS6-ED-130-1 1.3" 0.220" 1 Foot
HS6-ED-175-4 1.75" 0.290" 1
HS6-ED-175-4-5 1.75" 0.290" 5
HS6-ED-175-4-10 1.75" 0.290" 10
HS6-ED-175-1 1.75" 0.290" 1 Foot
HS6-ED-200-4 2" 0.330" 1
HS6-ED-200-4-5 2" 0.330" 5
HS6-ED-200-4-10 2" 0.330" 10
HS6-ED-200-1 2" 0.330" 1 Foot
HS6-ED-275-4 2.75" 0.460" 1
HS6-ED-275-4-5 2.75" 0.460" 5
HS6-ED-275-4-10 2.75" 0.460" 10
HS6-ED-275-1 2.75" 0.460" 1 Foot
HS6-ED-350-4 3.5" 0.673" 1
HS6-ED-350-4-5 3.5" 0.673" 5
HS6-ED-350-4-10 3.5" 0.673" 10
HS6-ED-350-1 3.5" 0.673" 1 Foot
HS6-ED-470-4 4.7" 0.900" 1
HS6-ED-470-4-5 4.7" 0.900" 5
HS6-ED-470-4-10 4.7" 0.900" 10
HS6-ED-470-1 4.7" 0.900" 1 Foot
More Information

Size
Expanded
Recovered
Internal Diameter
Wall Thickness
Internal Diameter
Wall Thinkness
A
D
a
d
3/4"
0.827"
0.0374"
0.123"
0.123"
1.3"
1.4"
0.0374"
0.2165"
0.1338"
1.75"
1.85"
0.0374"
0.2913"
0.1417"
2"
2.1"
0.0433"
0.327"
0.19"
2.75"
2.85"
0.0433"
0.46"
0.19"
3.5"
3.62"
0.0433"
0.673"
0.19"
4.7"
4.82"
0.0433"
0.9"
0.19"

B/b is equalled to the Internal Diameter plus Wall Thickness times 2. (B=Ax2D)

Property
Result
Test Method
Operating Temperature
-55C TO +110C
IEC 216
Tensile Strength
≥14MPa
ASTM D 2671
Tensile Strength after aging (158C/168hrs.)
≥12MPa
ASTM D 2671
Longitudinal Shrinkage
0 to -10%
UL 224
Elongation at Break
≥400%
ASTM D 2671
Elongation at Break after aging (150C/168hrs.)
≥300%
ASTM D 2671
Dielectric Strength
≥20kV/mm
IEC 243
Volume Resistance
≥10 Ω.cm
IEC 93
Heat Shock (225C/4hrs.)
No cracking or flowing
ASTM D 2671
Water Absorption
<0.2%
ISO 62
Softening Point
85C
ASTM D E28
Peel Strength PE
4N/cm
DIN 30672
Copper Stability
Non-corrosive
ASTM D 2671
Ressitance to Fungus and Decay
Pass
ISO 846