Made from radiation cross-linked polyolefin, these Heat Shrink Breakouts are suitable for single to multiple, or multiple to multiple wire connections. Each Heat Shrink Boot is UV resistant and has a hot glue ribbed liner on the inside to create air tight seals.
The shrink boots material and design make it perfect to seal crutch electrical connections that need superior insulation and water protection while providing strain relief on cable terminations.
Minimum shrink temperature: 110°C
Minimum full recovery temperature: 130°C
Shrink Ratio: 3 to 1
Max Voltage: 1000
| Part # | Boot Size | # of Cores (Breakouts) | Core Size | |
|---|---|---|---|---|
|
HSB-2-1 |
0.9 | 2 | 0.35 | |
|
HSB-2-1.2 |
1.2 | 2 | 0.55 | |
|
HSB-2-1.5 |
1.5 | 2 | 0.6 | |
|
HSB-2-2.5 |
2.5 | 2 | 1 | |
|
HSB-3-1.5 |
1.5 | 3 | 0.6 | |
|
HSB-3-2.5 |
2.5 | 3 | 1 | |
|
HSB-3-3 |
3 | 3 | 1.4 | |
|
HSB-4-1.5 |
1.5 | 4 | 0.55 | |
|
HSB-4-2 |
2 | 4 | 0.8 | |
|
HSB-4-2.5 |
2.5 | 4 | 1 | |
|
HSB-4-3 |
3 | 4 | 1.1 | |
|
HSB-5-1.5 |
1.5 | 5 | 0.5 | |
|
HSB-5-2 |
2 | 5 | 0.7 |
